INSTALLATION INSTRUCTIONS FOR TANKTUB OR TANKMATE

double wall oil tank, double wall containment, Oil tank Enclosures. storage tank storage tanks oil tank containment. spcc code approved. fuel oil secondary containment. state approved containment. tank cover and containment. containment solution. double wall doublewall. tankmate tankpan tanktray tankalarm. tank mate tank pan tank tub tanktub tanktray tank tray. 40 CFR112. 40 CFR 112. Oil tank Enclosuresplumbing, heating, green, farms, autodealers, car dealers, truck depot, contractors, builders, mobile home parks, trailer parks, oil 7 lube

 

AVOID HAVING TO NAIL TANKMATE COVER TO HOUSE BY USING OUR STAKE ACCESSORY KIT.

 

 INSTALLATION INSTRUCTIONS.

Included Parts:  2 Tank Mate galvanized steel stakes:  2 Zinc coated pins

Parts Needed:    7/16” Drill Bit and a Hammer

 

Complete Tank Mate Installation as per Tank Mate Installation Instructions. 

Using a 7/16” Drill bit, drill a hole in the Tank Mate Flange approximately 3” From the bottom. 

Insert approximately ¾ of the stake into the ground.  

Insert the looped end of the cable through the drilled hole and fasten the enclosed pin to secure the cable to the cover. 

Continue to place the stake in the ground until the cover is secure.

All  products mentioned are registered trademarks of their respective companies. 

For more information about our products and services please contact.